This products is designed to meet the require of EN469(2005) including A?(2006) and AC(2006)、Reg.II-2/?0 of SOLAS 74 as ameded , IMO、Res.MSC.36(63)-(?994 HSC Code)7,IMO、Res.MSC.97(73)-(2000 HSC Code)7,IMO Res.、MSC.98(73)-(FSS Code)3 Firefighter's protective suit (Hereinafter referred to theprotective suit)use multi-layer composite fabric as structure, The outer layer is radiant reflective aluminum foil fabric composed by heat retardant composite materials, the thermal insulation layer use flame-resistant viscose or flame-resistant textile fiber to provide heat insulation protection. This suit is a personal protective equipment for firefighter when approach flame area under strong retardant heat violation . But not for firefighter enter the flame area direct contact flame, or when handing radioactive substance, biological material and dangerous chemical.
Main Technical Property
1.Consist: each suit consists of jacket, trousers, socks.
2.Reflectivity of cloth: wavelength at 400-1000mm, total reflection is 70％; diffuse reflection is 40％.
3.Fireproof of cloth: carbon length＜100mm/
4.Tearing strength of cloth:＞1000g/cm
5.Peel strength of cloth:≥12N/50mm
6.Water resistance of cloth; without being seeped or broken under 2m of hydraulic pressure
7.Heat insulation property: the inner surface temperature≤45℃ when taking a period of time about 2 minutes at the temperature of 850℃ and at the distance of 1.75m from the fire source.
8.Insulation property: testing voltage＞5000v at palm position of the glove
9.Viewing angle: ＞120°
10.Height of fireman: 1.6～1.8m
Use and care
1.Inspect the suit carefully if it is damaged or not before wearing.
2.Wear the suit follow the routine that shoes and socks should be wom inside the trouser legs and all buttons should be done up.
3.Although the suit has fine property of fireproof and heat insulation, it is impossible to protect the fireman in all instances. Try your best to turn the suit away from being contacted directly with fire or molten metals when working near the flame. Proper fittings and positive pressure breathing-instrument should be equipped under the condition of chemical gas or radioactive harm.
4.Clean the surface of the suit with soft brush and neutral detergent after using, and then rinse it with clean water. Dry the suit in the air and avoid moisture after cleaning. Dunking the suit or hard attacking is prohibited.
5.the fireman’s protective suit should be put in a dry place with air through to prevent the composite layer from falling off the suit after damped.
6.Expiry date:three years